With gold prices in the stratosphere these days (currently $ 1,177.10/oz) it’s nice to know all that glitters is not just gold from them thar hills. Copper has also been used for centuries to make coins. Here we have a nice Danish Kroner that shines up nice like gold, though will not require a second mortgage to afford. I have a few of these at just $50 and available now (after I make them) in several sizes. They are 92% Copper with nickle and aluminum making up the balance. The coins are thicker than a U.S. Quarter and the artworks is deep and attractive. 

This one is available HERE

 It seems odd that I would get as excited about a coin ring as I do, though the 1964 JFK Half Dollar is somewhat legendary and very sought after. 1964 was the ONLY year that this coin was minted in 90% Silver. Even with just a 10% copper content, the rings are sealed in 2 coats of a jeweler’s sealant. 

From Wiki: Within hours of the assassination of John F. Kennedy on November 22, 1963, Mint Director Eva Adams called Chief Engraver Gilroy Roberts, informing him that serious consideration was already being given to depicting Kennedy on one of the larger silver coins: either the silver dollar, half dollar, or quarter dollar. Adams called Roberts again on November 27 and authorized the project, stating that the late president’s widow, Jacqueline Kennedy preferred that he be depicted on the half dollar replacing the previous design of Benjamin Franklin. (MORE…)

So I’m excited to offer up this next coin ring to the first person who orders it through the web site at The Rings Of Change. This will allow you to pick your size and own this piece of wearable history as it is the ONLY one I have right now.
Like I said… they are not super easy to come by in good (ring-worthy) shape.

GET YOURS HERE

A fellow who’s name rhymes with “Connor”, bestowed unto me a Brazilian coin that he’d found in Durham, NH. Apparently the place is riddled with coins from far off lands. Taking the coin, I looked at the smug face of the enshrined Efígie da República, on the front and thought I should punch that face out… to see if I could make a cool ring out of it (of course). I’d hoped it was a solid (single metal) coin with some silver or copper cladding to give it that two tone look.

As I took the coin down into the secret, underground TROC shop, I also contemplated the possibility of it being two distinctively different metals somehow married at the mint. Punching the face out went well and left some gold around the rim and some silver approximately the same with.
Then it was off the anneal and quench and start the folding process. This was an epic failure. My worst fears had been realized. In a split second I’d come face to faceless with the reality of the coin being made with two different metals, married at the mint… now divorced by a 1 ton Arbor press. The struggle is real. At least it did not cost me a Brazilian dollars. Not being one to take failure like a grown adult, I figure I can at least salvage the large outer ring and make a nice copper band that reads “Brasil”.

This beautiful baby has been on my bench for a few weeks. I felt a snowy day would be time well spent, and yield a stunning coin ring. This 80% Silver coin did not disappoint.  With both the Obverse and Reverse sides having such great design, it was tough to decide which would be the facing side of the ring.

Obviously I went with the Reverse side because the floral design was more universally understood than the Obverse side containing Japanese words or dates of which I haven’t a clue mean. 

Given their high silver content and the age, these coins are not easy to find in great shape. Since silver is fairly soft, the art would wear off by simply being carried around in the pockets and purses of millions of people over more than 100 years.

I have to give credit to the fact that I have hunted down some pretty good sources when it comes to purchasing rare coins. Here is the semi-finished product. It’s at a U.S. Size 9 now and can be up or down sized 2 sizes without too much loss of detail.

In celebration of my new Jason’s Works Auto-Punch, I decided to take on a new challenge. A GINORMOUS coin. In this case… a full 39mm Aztec Calendar coin. The real thing is 12 feet and weighs 27 Billion tons… more or less. Try wearing that thing.
Because of the rather intense detail on this coin I had to do about 6 Swedish Raps to protect the detail. After a half mile of Teflon tape, this is the result.
While it has a mega level of cool-factor. You might think it would be north of $100. Actually I am putting these out at $50. The 90% Silver ones will go for $150. I put 2 coats of jeweler’s clear coat on them (24 hours/coat for curing).
I’m really excited about taking on the big coins though their band width is more than some like. Keep your eyes open for these in 90% Silver and some classic Morgan Dollar and Walking Liberty coin rings. If you like and want one, head to www.theringsofchange.com and put in a special order with you choice of coin and ring size.

We’ve all heard of “ suffering for your art”, or some other version of the idea. Well it was my turn to spill blood today. I’d come into possession of some cool Spanish coins from a secret source (wife). These were the thickest coin I’ve ever punched a hole in. Using the 6 ton, A-Frame press I started the punch. I swear I must have reached 5.9 tons of pressure by the time it went through. 

Sadly the release of pressure on the press had my left hand involuntarily going somewhere quickly. Not really sure where, but it had what I thought was a scrape, so I went back to work. While de-burring, I saw red splats on my bench. Strange. It didn’t hurt more than a scratch. Washing it out revealed a pretty deep gash. Not stitch-worthy… but flowing enough to require abandoning my Spanish coin project for more time than I wanted.

Keep you eyes open for these two Spanish Peseta’s sometime tomorrow.

Continue reading →